ADVANCED SCOOTER WORKSHOP-NEXT (ASW-NEXT) LATEST VERSION

Product code: aswnew

Available quantity In stock

ASW-NEXT ORIGINAL BOX:

MAIN UNIT WITH BOX, USB CABLE, WIRES WITH PINS, ACTIVATED ORIGINAL SOFTWARE

SUPORT LATEST SOFTWARE V1.43

!!! THIS PRODUCT IS NON-REFUNDABLE AND NON-EXCHANGEABLE. MAKE SURE BEFORE YOU BUY IT !!!

!!! NOT COVERAGE OLD ASW TOOL FUNKTIONS ITS TWO DIFERENT TOOLS !!!

ORIGINAL ITEM FROM MANUFACTURER, ITEMS SUPORT TECHNICAL INFORMATION, SOFTWARE LICENCES BY HARDWARE, UPDATES (if available), WARRANTY REPAIRING, AFTER WARRANTY REPAIRING

46000 inc VAT
38017 excl VAT
Have any questions about this item? Ask

♦  Latest software V1.43 (September 23, 2025) 

Fixed security access calculation issue for some COBO LCD instrument clusters

Extended list of supported devices for COBO LCD instrument clusters. NOTE: some newly added units may not support a function for mileage decrease.

Added IMMO-OFF for latest versions of Magneti Marelli M4G1 / M4G2 with drawing number CM33xxxx

Supported control units (V1.42)

• ELDOR KUBO throttle ECU
✓ Read Identification and immobilizer status
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Reset thottle position sensor programming (TPS)
✓ Reset self-adptive parameters
✓ Read / Write full MCU FLASH with CRC repair (BOOT mode)
✓ Read / Set keys in MCU FLASH (BOOT mode)
✓ Read / Set keys in MCU FLASH dump
✓ Reset to VIRGIN (BOOT mode)

• Magneti Marelli MIU1 / MIU2 / MIU4 throttle ECU
✓ Read Identification and immobilizer status
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Reset self-adptive parameters
✓ Read full MCU FLASH by diagnostics (regular mode)
✓ Write partial MCU FLASH by diagnostics (regular mode)
✓ Read / Write full MCU FLASH (BOOT mode)
✓ Read / Set keys in MCU FLASH (BOOT mode)
✓ Reset to VIRGIN (BOOT mode)
✓ Set IMMO-OFF in MCU FLASH dump

• Magneti Marelli MIU G3 (M3G1 / M3G3) throttle ECU
✓ Read Identification and immobilizer status
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Enable / Disable ASR
✓ Reset self-adptive parameters
✓ Download data buffer when fault code P1607 present
✓ Read / Set keys
✓ Read / Write EEPROM 95320
✓ Read full MCU FLASH
✓ Write partial MCU FLASH
✓ Reset to VIRGIN
✓ Set IMMO-OFF in MCU FLASH dump
✓ Configure ASR in MCU FLASH dump

• Magneti Marelli MIU G4 (M4G / M4G1) throttle ECU
✓ Read Identification and immobilizer status
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Reset throttle position sensor programming (TPS)
✓ Reset self-adptive parameters
✓ Configure ASR
✓ Download data buffer when fault code P1607 present
✓ Read / Write VIN
✓ Read / Set keys
✓ Read / Write EEPROM 95640
✓ Read / Write partial MCU FLASH (20000-7FFFF)
✓ Reset to VIRGIN
✓ Set IMMO-OFF in MCU FLASH dump
✓ Set ASR-OFF in MCU FLASH dump
✓ Recovery of „bricked“ ECU

• Magneti Marelli immobilizer unit IMM003 / IMM006
✓ Read / Set keys by diagnostic
✓ Read / Set keys in EEPROM dump
✓ Read / Write MCU EEPROM
✓ Reset to VIRGIN
✓ Set IMMO-OFF in MCU FLASH dump

• Magneti Marelli IAW15P ECU
✓ Read Identification
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Reset throttle position sensor programming (TPS)
✓ Read / Set Master key as a synchronization with immobilizer unit
✓ Read / Write MCU EEPROM
✓ Read / Write full FLASH M29F010B
✓ CRC repair of FLASH file
✓ Reset to VIRGIN
✓ Set IMMO-OFF in FLASH dump

• Magneti Marelli CDI unit
ACI100 / ACI500 / ACI501 / ACI502 / ACI503 / ACI504 / ACI505
ACI600 / ACI601 / ACI602 / ACI603 / ACI604 / ACI605 / ACI606
✓ Read / Set keys
✓ Read / Write MCU EEPROM
✓ Reset to VIRGIN

• Synerject M3A ECU / throttle ECU
✓ Read Identification
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Read / Set synchronization with immobilizer unit
✓ Read / Write full MCU FLASH
✓ Reset to VIRGIN
✓ Set IMMO-OFF

• DELL‘ORTO ECU for Peugeot Metropolis 400 / Satelis 400
✓ Read Identification
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Read full MCU FLASH by diagnostics (regular mode)
✓ Read emulated EEPROM by diagnostics (regular mode)
✓ Read keys by diagnostics, Satelis 400 only (regular mode)
✓ Read / Write full MCU FLASH (BOOT mode)
✓ Read / Set keys in MCU FLASH (BOOT mode)
✓ Reset to VIRGIN Metropolis 400 (regular mode)
✓ Reset to VIRGIN Satelis 400 (BOOT mode)
✓ Read / Set keys, Satelis 400 only (BOOT mode)
✓ Set IMMO-OFF in MCU FLASH dump
✓ CRC repair of loaded FLASH file

• COBO instrument cluster for Aprilia RSV4 / Dorsoduro / Shiver /
RS 660 / Tuono 660 / Moto Guzzi V85 E4 / Moto Guzzi V85 E5

• COBO LCD TFT 5“ for RSV4 1100 E5 / Tuouno V4 1100 E5 /
Tuareg 660
✓ Read Identification
✓ Reset service reminder
✓ Reset keys (no user code required)
✓ Reset user code (no valid key required)
✓ Increase / decrease / zero odometer
✓ Read set odometer from/to EEPROM dump (open instrument cluster)
✓ Read user PINCODE from EEPROM dump (open instrument cluster)
✓ Read / Set keys from/to EEPROM dump (open instrument cluster)

• KEIHIN ECU for Honda SilverWing 400 / 600
✓ Read EEPROM 93C56
✓ Write EEPROM 93C56

• DELL‘ORTO E.C.S. CLC carburetor control unit (EURO4)
✓ Read MAPS
✓ Write MAPS

• EFI TECHNOLOGY PGU09 / PGT10 / PGV01 (EURO4)
✓ Read Identification and immobilizer status
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Reset throttle position sensor programming (TPS)
✓ Reset self-adptive parameters
✓ Read / Write VIN
✓ Read / Set keys
✓ Read / Write MAPS (for chip tuning or de-restriction)
✓ Reset to VIRGIN
✓ Set IMMO-ON / IMMO-OFF
✓ Read key in the ignition lock

• EFI TECHNOLOGY PGN04 / PGR02 / PGR04 / PGS02 / PGS06
✓ Read Identification and immobilizer status
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Reset throttle position sensor programming (TPS)
✓ Reset self-adptive parameters
✓ Read / Write VIN (if in use)
✓ Read / Set keys
✓ Read / Write MAPS (for chip tuning or de-restriction)
✓ Reset to VIRGIN
✓ Set IMMO-ON / IMMO-OFF

• EFI TECHNOLOGY PGQ16 / PGV18
✓ Read Identification and immobilizer status
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Reset throttle position sensor programming (TPS)
✓ Reset self-adptive parameters
✓ Read / Write VIN
✓ Read / Set keys
✓ Read / Write MAPS (for chip tuning or de-restriction)
✓ Reset to VIRGIN
✓ Set IMMO-ON / IMMO-OFF
✓ Read key in the ignition lock

• EFI TECHNOLOGY CDI
ACII / AC2I / AC5I / AC8I / AC13I / AC14I / AC19I / AC20I
AC21I / AC23I / AC24I / AC25I / AC27I / AC28I / AC32I
✓ Read Identification and immobilizer status (EURO3 units only)
✓ Read / Erase diagnostic trouble codes (DTC) (EURO3 units only)
✓ Read / Write external SPI EEPROM
✓ Read / Write internal MCU EEPROM (EURO2 units only)
✓ Read / Set keys
✓ Reset to VIRGIN
✓ Set IMMO-ON / IMMO-OFF
✓ Read key in the ignition lock

• PHILIPS Synerject M2 for TSDI / DiTech engines
✓ Read Identification
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Reset throttle position sensor programming (TPS)
✓ Read / Write MCU EEPROM
✓ Read / Write MCU FLASH (for chip tuning or de-restriction)
✓ Read / Write external SPI EEPROM 25160 (if equipped)
✓ Reset to VIRGIN
✓ Set IMMO-OFF
✓ Supports programming of MCU with mask 2J74Y and 3K85K

• YAMAHA TMax / XMax PINCODE Calculator
✓ Calculate PINCODE from immobilizer unit with 24C02
✓ Calculate PINCODE from immobilizer unit with 24C04
✓ Calculate PINCODE from steering lock unit with 93C56
✓ Calculate PINCODE from transponder key ID
Technical support: support@immo-tools.lt

• Peugeot Metropolis SMART KEY (2013-2020)
✓ Read Identification
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Read PINCODE
✓ Register Smart Keys
✓ Reset SMART KEY ECU to VIRGIN
✓ Write Smart Key ID and PINCODE to SMART KEY ECU
✓ Update software of SMART KEY ECU

• Peugeot Metropolis SMART KEY 2 (2021+)
✓ Read Identification
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Read PINCODE
✓ Read EEPROM
✓ Register Smart Keys

• DELL‘ORTO Varroc ECU (E5) for European and Indian brands
✓ Read / Write Software and Calibrations area in the FLASH of SPC572
✓ Read 32 kB Data FLASH image of SPC572 (write is not implemented yet)
✓ Check / Repair FLASH CRCs
✓ Read identification
✓ Read / Erase Diagnostic Trouble Codes (DTC)

• Magneti Marelli M4 / M4A throttle ECU
✓ Read Identification and immobilizer status
✓ Read / Erase diagnostic trouble codes (DTC)
✓ Enable / Disable ASR
✓ Reset self-adptive parameters
✓ Download data buffer when fault code P1607 present
✓ Read / Set keys
✓ Read / Write EEPROM 95640
✓ Read full MCU FLASH
✓ Write partial MCU FLASH
✓ Reset to VIRGIN
✓ Set IMMO-OFF in MCU FLASH dump

!!! NOT COVERAGE OLD ASW TOOL FUNKTIONS ITS TWO DIFERENT TOOLS !!!

ORIGINAL ITEM FROM MANUFACTURER, ITEMS SUPORT TECHNICAL INFORMATION, SOFTWARE LICENCES BY HARDWARE, UPDATES (if available), WARRANTY REPAIRING, AFTER WARRANTY REPAIRING

DOWNLOAD LATEST SOFTWARE AND MANUAL

Write
Call us